| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
Baileigh R-M50 Roll Bender
Technical Specifications and Standard Features:
- Spheroid Cast Iron Frame.
- Two rolls are powered.
- Rolls are hardened.
- Shafts are hardened with special steel alloy.
- Rolls are made from special steel alloy hardened and ground.
- Horizontal and vertical working position.
- Standard rolls, guide rolls included.
- Foot Pedal Controls.
- Users manual book included.
- Electrical Service - 220V, Single-Phase, 60 Hertz
- Weight is 792 lbs.
Optional Accessories:
- Pipe / Tube Bending Rolls
- Profile Bending Rolls
- Angle Bending Rolls
- Special Lateral Angle Guides
- Digital Read-Out
The Model R-M50 ring roll bender is for small to medium production runs of flat bar, round tubing or pipe
and smaller angle iron. This pipe bender comes with the lateral guide rolls allowing for two dimensional
bending, as well as a set of standard section rolls. The R-M35 tube bender can bend up to 2 inch square
tubing. The foot pedal controls has one pedal for clockwise and another for counter clockwise rotation of
the two lower rolls. This electric bender is great for the hobbiest or small business whose production
requirements consist of small to medium wall thicknesses of metal. This is one of our most popular section
roll benders.
Baileigh Industrial carries a large inventory of pyramid tubing benders and tooling in stock for
immediate delivery! Our angle roll benders offer high quality for an affordable price. If your looking
for an angle bender or a general roll forming machine for various different metals and configurations,
then our angle bending rolls will fit the ticket. When you think of bending machines, think of Baileigh
Industrial. Thus, enjoy our site and call with any questions that you might have.
| Specifications: R-M50 Roll Bending Machine |
| Shaft Diameter: |
1.968" |
| Shaft Speed: |
9 RPM |
| Upper Roll Diameter: |
6.1" |
| Lower Roll Diameters: |
6.1" |
| Power Requirements: |
220V, Single-Phase, 30 Amp |
| Weight: |
770 Lbs. |
| Length: |
26" |
| Width: |
35.5" |
| Height: |
53.3" |
| Driven Rolls: |
2 |
| Capacities: R-M50 Roll Bending Machine |
| Mild Steel |
Max. Size OD/Wall |
Min. Dia. |
| Flat Bar (Hard Way): |
1.5" (.375) |
20" |
| 2.3" (.375) |
31.5" |
| Flat Bar (Easy Way): |
2.3" (.375) |
24" |
| 3.9" (.50) |
29.75" |
| Solid Square Rod: |
.75" |
15.75" |
| 1.3" |
47.25" |
| Solid Round Rod: |
1.2" |
24" |
| 1.3" |
31.5" |
| Round Tube: |
1.2" (.078) |
20" |
| 2.75" (.078) |
47.25" |
| Pipe: |
1" Sch 10 |
12.75" |
| 2" Sch 10 |
47.25" |
| Rectangular Tube: |
2" x 1.5" (.120) |
59" |
| 2.75" x 1.2" (.078) |
59" |
| Square Tube: |
1.5" (.083) |
31.5" |
| 2" (.083) |
78.75" |
| Angle Iron (Leg Out): |
2" x 2" (.197) |
33.5" |
| 2.3" x 2.3" (.250) |
47.25" |
| Angle Iron (Leg In): |
1.2" x 1.2" (.120) |
27.75" |
| 2" x 2" (.250) |
47.25" |
| T-Bar (Leg Out): |
2" x 2" (.250) |
25.75" |
| 2.3" x 2.3" (.275) |
35.5" |
| T-Bar (Leg In): |
2" x 2" (.250) |
25.75" |
| 2.3" x 2.3" (.275) |
35.5" |
| Channel (Legs Out): |
2.3" x 1.2" (.250) |
21.75" |
| 3" x 1.75" (.250) |
39.5" |
| Channel (Legs In): |
2.3" x 1.2" (.250) |
27.75" |
| 3" x 1.75" (.250) |
47.25" |
|
|
| |
|
|
|
|
Benders
