| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
Model 900
- This tube and pipe notcher comes standard with one spindle and two belts. The RMD Abrasive Tubing Notcher uses abrasive belts that can be sourced locally, which reduces operation cost.
- The Model 900 pipe notcher has a lever feed mechanism that offers effortless tube notching and has a positive stop for repetitive notches
- Abrasive belts can be changed quickly due to our unique belt tensioning system. Automatic belt tension system reduces tracking issues, and adjusts to accommodate for any stretching. Proper tension extends belt life.
- Notch up to 3 inch OD
- This tubing notcher has an innovative quick release spindle system that offers:
- Extremely high grade bearings are oil lubricated on the machine instead of on the spindles. This lengthens bearing life.
- Release spindle in one second. Fast "no-bearing", tool-less spindle changes out in seconds
- Quick release lever allows for tool-less spindle change-overs
- Quick removal of side guard means fast and easy belt replacement
- The grinding station is located opposite the notching station. By simply lifting the grinding guard and flipping a belt reverse switch the Model 900 transforms a professional Grinder
- The vise is fully swivelable up to 60 degrees in either direction with "one" lock screw allowing for fast changes to the notch angle. Vise can be adjusted off center to utilize entire width of the belt. Vise does have an offset adjustment for offset notches.
- Like all RMD pipe notchers this abrasive pipe notcher is American Made and built better than all other abrasive notchers on the market
- Create perfect weld joints in chromolly, mild steel, stainless steel, and aluminum
- The Model 900 tube notchers can run on 240Volt, 60 Hertz, Single or 3-phase, 5 HP Motor.
- RMD tubing notchers are Made in America
| Specifications and Capacities: TN-900 |
| Mild Steel Pipe (Schedule 40) |
2.5" |
| Aluminum Pipe (Schedule 40) |
2.5" |
| Stainless Steel Pipe (Schedule 40) |
2.5" |
| Mild Steel Round Tube |
3" |
| Aluminum Round Tube |
3" |
| Stainless Steel Round Tube |
3" |
| Chromolly Round Tube |
3" |
| Mild Steel Solid Rod |
3" |
| Mild Steel Square Tube |
3" |
| Minimum OD |
.75" |
| Power Requirements |
220V (1-Phase) |
| Weight (Lbs.) |
425 |
| Length |
68" |
| Width |
40" |
| Height |
43" |
|
|
| |
|
|
|
|
Benders