| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
- The Model 800 tubing notcher has an operator adjusted eccentric path that requires only one cuter to notch weld joints on tubing, pipe, or solids with outside diameters of 1 inch to 3 inch. This unique feature means the Model 800 tube notcher tooling cost savings are on going. Notching under 1 inch is achieved by installing optional 1/2 inch cutter and adapter bushing
- Notch quicker and cleaner than abrasive style machines without sparks, dust, and excessive heat. Does not contaminate the weld joint, offering more strength in weld. No ongoing costly abrasive belt replacement or need for costly spindles for different size tube or pipe.
- This pipe notcher has a large single direction hand wheel (hand wheel is clutched to only go in one direction) that allows the user to feed cutter through an eccentric path creating a precision weld joint with one quick pass, saving you time and money
- Our pipe notchers are capable of notching up to 60 degrees in either direction
- Unmatched versatility, mobility, and easy operation.
- Create perfect weld joints in chromolly, mild steel, stainless steel, and aluminum.
- Cross slide table, angle vise, and V-Jaws can be independently calibrated allowing accurate positioning of straight, angled, or offset notches.
- Changing over Model 800 tubing notchers from one diameter to another can be accomplished quickly and efficiently, saving you time and money
- Ruggedly built stand with large wheels and casters allows for fast and easy mobility. This tube notcher requires 110 V, Single Phase, 60 Hertz (15 Amp).
- Coping Machine.
- The Model 800 tubing notcher weighs an impressive 480 lbs (solid steel construction).
- RMD tube notchers are Made in America
| Specifications and Capacities: TN-800 |
| Mild Steel Pipe (Schedule 40) |
2.5" |
| Aluminum Pipe (Schedule 40) |
2.5" |
| Stainless Steel Pipe (Schedule 40) |
2.5" |
| Mild Steel Round Tube |
3" |
| Aluminum Round Tube |
3" |
| Stainless Steel Round Tube |
3" |
| Chromolly Round Tube |
3" |
| Mild Steel Solid Rod |
3" |
| Mild Steel Square Tube |
3" |
| Minimum OD |
.50" |
| Power Requirements |
110V |
| Weight (Lbs.) |
480 |
| Length |
44" |
| Width |
28" |
| Height |
42" |
|
|
| |
|
|
|
|
Benders