| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
RMD Model 350 Rotary Draw Bender
- Programmable Electric Tubing Benders
- Lease this model 350 pipe and tubing benders, call for quote.
- This tubing bender has a maximum capacity of 2.5 inch Schedule 40 pipe, 3 inch tube (.187 wall thickness), 3" inch square tubing (.093 wall thickness)
- The OCS (Operator Control Station) allows for quick, accurate repeatability of multiple or single bends. Unit can store up to 20 programs with 10 bends per program. The OCS unit is extremely easy to program.
- The model 350 square tubing bender has a maximum bend speed of 6 seconds at 90 degrees.
- Quick release counter die system allows for maximum efficiencies for high production runs.
- This tubing bender has a larger CLR than most competing tube benders. The maximum CLR is 22".
- Extra heavy duty design normally seen on larger models means more value for the investment.
- Power required is 220 V, 3 phase, 60 Hertz, 30 amp
- Similar to other RMD programmable tube benders, the model 350 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
- Weight is approximately 1200 lbs (solid steel construction)
- Maximum bend is 180 degrees (plus spring back up to 206 degrees).
- Bend Material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
- All RMD pipe benders are Made in America
| Specifications and Capacities: RDB-350 |
| Mild Steel Pipe (Schedule 40) |
2.5" |
| Aluminum Pipe (Schedule 40) |
3" |
| Stainless Steel Pipe (Schedule 40) |
2" |
| Mild Steel Round Tube (Wall) |
3" (.187) |
| Aluminum Round Tube (Wall) |
3.5" (.250) |
| Stainless Steel Round Tube (Wall) |
3" (.125) |
| Chromolly Round Tube (Wall) |
2.5" (.125) |
| Mild Steel Solid Rod |
1.5" |
| Mild Steel Square Tube (Wall) |
3" (.125) |
| Minimum OD |
.25" |
| Maximum Speed to 180 Degrees |
16 Seconds |
| Maximum Center Line Radius (CLR) |
24" |
| Minimum CLR |
.5" |
| Power Requirements |
***220V (3-Phase) |
| Weight (Lbs.) |
1500 |
| Length |
69" |
| Width |
32" |
| Height |
46" |
*** Other Voltages available by special order
|
|
| |
|
|
|
|
Benders