| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
RMD Model 300 Rotary Draw Bender
- Programmable electric tubing bender
- Maximum capacity is 2 inch Schedule 40 pipe, 2 inch square tubing, 2-1/2 inch " tube
- Lease this model pipe bender call for details.
- To program a bend, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head will automatically stop at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends
- Like most RMD tubing benders, the model 300 utilizes a portable cart with wheels for easy mobilization around the job site or production floor.
- The maximum center line radius on the Model 300 is 12 inches, while the 300 with OCS is 15 inches
- The maximum bend degree is 206
- Required power is 220V, single phase, 60 hertz
- Optional OCS (operator control station) programming unit can store multiple programs. Each program can store 10 different bend angles. The model 300-S tube bender with OCS was designed to be understood easily for ease of operation.
- Like all RMD tube benders, bends can be advanced after stopping machine, saving on material costs during set-up.
- Non-proprietary center die spindle allows for custom tooling applications.
- Bend material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
- This tubing bender is supplied with an AC variable speed motor drive with built in speed potentiometer.
- Similar to other RMD programmable tube benders, the Model 300 can be fitted with a rotary positioning table allowing for accurate bends in varying planes, as well as consistent measurements between bends.
- RMD pipe benders are Made in America
| Specifications and Capacities: RDB-300 |
| Mild Steel Pipe (Schedule 40) |
2" |
| Aluminum Pipe (Schedule 40) |
2.5" |
| Stainless Steel Pipe (Schedule 40) |
1.5" |
| Mild Steel Round Tube (Wall) |
3" (.095) |
| Aluminum Round Tube (Wall) |
2.5" (.156) |
| Stainless Steel Round Tube (Wall) |
2.375" (.164) |
| Chromolly Round Tube (Wall) |
2" (.125) |
| Mild Steel Solid Rod |
1.25" |
| Mild Steel Square Tube (Wall) |
2" (.125) |
| Minimum OD |
.25" |
| Maximum Speed to 180 Degrees |
**8/16 Seconds |
| Maximum Center Line Radius (CLR) |
15" |
| Minimum CLR |
.5" |
| Power Requirements |
***220V (1- or 3-Phase) |
| Weight (Lbs.) |
710 |
| Length |
50" |
| Width |
28" |
| Height |
42" |
** High Speed Model / Standard Model; *** Other Voltages available by special order
|
|
| |
|
|
|
|
Benders