| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
RMD Model 200 Rotary Draw Bender
- Programmable electric tubing bender
- Maximum capacity is 1.5 inch Schedule 40 pipe, 1-1/2 inch square, 2 inch tube (depending on wall thickness).
- To program a bend on the Model 200 pipe bender, simply turn the degree hand wheel to the desired bend angle (include spring back). When performing a bend, the die head automatically stops at the degree indicated on the numerical counter. Allows for accurate repeatability when performing one or multiple bends. RMD pipe benders are extremely easy to program.
- Remote operator interface is standard on this pipe bender.
- The Model 200 square tubing bender is equipped with a lead screw indicator that ensures repeatable counter die positioning for multiple bends.
- Like on all RMD square tubing benders, the bend can be advanced after stopping machine, saves on set up cost (material savings).
- Maximum bend is 180 degrees (machine limit is 202 degrees).
- Maximum CLR is 9 inch
- Required power is 110V, Single-Phase, 20A, 60Hz
- Approximately 510 lbs
- Optional rotary positioning table allows for accurate bends in varying planes.
- RMD tube benders are Made in America
| Specifications and Capacities: RDB-200 |
| Mild Steel Pipe (Schedule 40) |
1.5" |
| Aluminum Pipe (Schedule 40) |
1.5" |
| Stainless Steel Pipe (Schedule 40) |
1" |
| Mild Steel Round Tube (Wall) |
2" (.095) |
| Aluminum Round Tube (Wall) |
2" (.125) |
| Stainless Steel Round Tube (Wall) |
2" (.125) |
| Chromolly Round Tube (Wall) |
1.75" (.083) |
| Mild Steel Solid Rod |
1" |
| Mild Steel Square Tube (Wall) |
1.5" (.125) |
| Minimum OD |
.25" |
| Maximum Speed to 180 Degrees |
18 Seconds |
| Maximum Center Line Radius (CLR) |
9" |
| Minimum CLR |
.5" |
| Power Requirements |
110V |
| Weight (Lbs.) |
540 |
| Length |
38" |
| Width |
26" |
| Height |
44" |
|
|
| |
|
|
|
|
Benders