| New Products: |
MB and NCB Mandrel Bender Line Featuring Touch Screen Programmability. |
|
| As Seen on TV: |
As seen on BIG!, Monster Garage, Monster Nation,
and American Chopper. |
|
| Testimonials: |
"I have purchased four machines from Baileigh
and found their machines to be of top quality, made with pride, and designed to last." - Airfox Inc.
More Testimonials |
|
|
| |
|
|
| |
RMD Model 100 Manual Bender
- Unique ratcheting mechanism allows you to bend easily by simply pulling a level. Each pull delivers 10 degrees of movement. For thinner walled tubing this machine turns into a hand tube bender by over riding the ratcheting mechanism.
- Bends pull out in seconds (no disassembly required.)
- Our manual pipe benders have a maximum capacity of 1 inch Schedule 40 pipe, 1 inch square and 1-3/4 inch tube
- Rotary Draw Bender
- Model 100 manual tubing bender is a great fabricating machine for general shop use or light production work.
- If the fabricator has several RMD tubing benders, tooling is interchangeable reducing tooling costs.
- RMD tube benders have a heavy duty construction and design that offers more power with less effort.
- Bend Material: Round or square tubing, pipe, flat stock, angle iron, or solid rod.
- No pins to move or re-engaging to reach 206 degrees; this is accomplished by anti-reverse stop latch.
- Highly visible degree dial improves accuracy.
- RMD tube benders have die sets that allow for extremely tight radii for non-mandrel bending.
- Our tube benders have a non-proprietary die spindle head that allows the end user to fit machine with their own tooling if desired.
- Built to the same high quality standards as all other RMD tubing benders.
- This RMD pipe bender is made in America!
| Specifications and Capacities: RDB-100 |
| Mild Steel Pipe (Schedule 40) |
1" |
| Aluminum Pipe (Schedule 40) |
1" |
| Stainless Steel Pipe (Schedule 40) |
.75" |
| Mild Steel Round Tube (Wall) |
1.75" (.083) |
| Aluminum Round Tube (Wall) |
2" (.125) |
| Stainless Steel Round Tube (Wall) |
1.5" (.083) |
| Chromolly Round Tube (Wall) |
1.5" (.083) |
| Mild Steel Solid Rod |
1" |
| Mild Steel Square Tube (Wall) |
1" (.125) |
| Minimum OD |
.25" |
| Maximum Speed to 180 Degrees |
N/A |
| Maximum Center Line Radius (CLR) |
7" |
| Minimum CLR |
.5" |
| Power Requirements |
N/A |
| Weight (Lbs.) |
290 |
| Length |
42" |
| Width |
22" |
| Height |
42" |
|
|
| |
|
|
|
|
Benders