Baileigh sheet metal equipment always offers great value in its line of machinery, that's why we specifically sell the PR-514 with the motorized back roll and digital positioning readout display to allow for repeatable bends time and time again. The operator console is remote so the operator can move to the best position to properly run the machine. This console has foot pedal controls, and houses the buttons for advancing or retracting the back roll position. An emergency stop button is in the remote console and there is an Emergency Stop perimeter wire that circles the machine, so you can simply trip the wire and the machine will come to a halt. This plate roller is in stock ready to ship. Baileigh's PR-514 plate roll is the perfect roll bender for small and medium rolling applications. This machine has a useful width of 5' and has a capacity of 14 gauge mild steel sheet metal. The PR-514 has a rugged frame that allows for no deflection across the useful width, even at the maximum capacity. The rollers are induction hardened to allow years of useful life. The rolls also have three wire grooves. This plate roll bender has a 3-1/2 HP motor that has a direct gear drive system that allows for a sure transfer of power that reduces slippage. This machine has power requirements of 220 volt, three phase, 60Hz. The top roller has an outside diameter of 3-1/2" and with the right material and thickness can roll as tight as 1-1/2 times the top roll. Having a useful width of 5' is perfect when the fabrication project requires 4'x8' sheets. This size will also allow for rolling funnel or cone shapes. Bending capacities of 14GA aluminum and mild steel are easily accomplished, and even up to 18GA stainless steel.