Click Here for a diagram of mandrel tooling.

Includes:

• Touch screen operator interface with capability to program up to 140 programs, with up to 10 bends per program.
• 10’ Extraction Table
• Rotary positioning carriage with 4 manual stops.

Max Bending Capacity:

• Round Mild Steel - 3"OD x .125" Wall
• Round Aluminum - 3"OD x .188" Wall
• Round Stainless - 3"OD x .065" Wall
• Square Mild Steel - 2"x2" x .188" Wall
• Solid Bar Mild Steel - 1.181"OD

Additional Specifications:

• Right Handed Bender
• Single Stack Tooling
• Mandrel Tubing Bender
• Bend axis is driven by electrical mechanical drive system. Linear feed and plane of bend rotation are by rotary degree positioning carriage with linear scale and 4 manual linear stops.
• User friendly touch screen interface allows for storage of programs, speed of bend changes, amp meter readings, counter for number of bends, and spring back values.
• Clamp die has hydraulic and mechanical locking system that reduces the possibility of slippage.
• Mandrel extractor uses powerful hydraulic system to insert, hold, and extract the mandrel. Also employed is an adjustable mandrel positioning device.
• Follower die is positioned and held tight against rotary die and wiper die.
• Foot pedal control works in conjunction with touch screen instructions. On screen safeties ensure improper operations can not be completed.
• Maximum Bend Radius - 12" CLR
• Maximum Angle - 190°
• Maximum Length over Mandrel - 10"
• Bending Speed (DOB) - 18 degrees per second
• Accuracy of DOB - +/- 0.50°
• Machine Weight - 2100 lb
• 220V x 60Hz x 3 Phase

Bending capacity may vary depending on OD, WT, CLR, material, and supply of material. RMD retains the right to amend designs from time to time without any prior notice. The buyer must provide 10 pieces of test bending material for each different die and mandrel size specified. Machine will be tested with tooling and material before shippment. Manufacturer reserves the right to hold shipment until successful testing has been performed. If desired, factory onsite training can be hired for $780 per day plus travel and lodging costs. Mandrel pipe benders are used where a consistent ID is required. Our industrial strength mandrel exhast pipe benders would be a great investment for the future of your exhaust bending shop.