The 13" x 18" BS-20M Manual Band Saw with 1" x 13'6" x .032" thick blade, has extremely heavy-duty cast iron guide arms and wheels.

• This band saw uses a 1 inch band saw blade, making it an extremely fast and accurate cutting saw.
• The machine will automatically shut down in the event of a broken blade.
• A Coolant pump cools the blade blade and assists in chip removal system.
• The cast iron saw head provides superior rigidity and swivels from 0 to 60 degrees.
• Direct gear drive extends saw blade life, and allows the machine to make more accurate cuts in less time.
• Hydraulically controlled descent feed can be adjusted easily with the turn of a knob.

The BS-20M Band Saw is capable of cutting Thirteen Inch Outside Diameter and is the perfect band saw for cutting at 90 degrees or miter angles. This saw can cut up to 18 inch x 13 inch material. This means that the customer gets much more value for the investment than with any other band saw on the market. The blade is guided by the tight tolerances of hardened roller bearings and accompanied by tungsten wear guides. This band saw has four operating speeds, a mitering head, and a hydraulically-controlled descent device to allow perfect feed speeds and longer blade life. Our band saws are constructed of a cast iron saw head and base. This band saw has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks.

This series band saw has a hydraulic descent control device for large production runs that increases blade life and reduces operator fatigue. This metal cutting band saw can cut up to Thirteen Inches Outside Diameter. The power requirements of this band saw is 220 Volt, Three Phase, 60 Hertz. The quick releases allow the operator to change the miter angle in seconds. The BS-20 horizontal bandsaw has a mitering head that can swivel up up to 60 degrees. This horizontal band saw comes standard with four drive speeds, allowing the operator to fine tune the blade speed for the material he or she is cutting. This metal cutting saw series requires a 1" wide saw blade by .032" thick blade, which makes this series a very precise miter saw. This band saw offers more cutting capacity for the investment in a variable speed miter saw than any other saw on the market. Baileigh Industrial, Inc., supplies quality bandsaws at an exceptional value.